4/5/6 PCS Damaged Screw Extractor Drill Bit Set Stripped Broken Screw Bolt Remover Extractor Easily Take Out Demolition Tools

Note:The deeper the hole, the easier it is to remove the screw.

Description:
*The 6 piece screw extractor set works with any drill and any screw size or bolt,
*Great for stripped, broken, stuck or damaged and screw removal.
Screw Remover – Removes any stripped screw in 10 seconds or less!

Instructions for use:
1.Select screw remover that is smaller than the damage screw.
Use a drill to turn a hole deep enough in the middle of the screw head.
2.Take out the screw remover then reverse the screw extractor
3.Hand drill is turned counter clockwise slowly to drill,but do not use high-speed drilling

Specification:
Color: Silver/Gold
Material: tungsten carbide tip
Length: 51 mm/ 2.01 inch

Package includes:
Option one:
6 X Screw extractors with box (Silver/Gold) (The specific size is described by the picture)
Option two:
5 X Screw extractorswith box(Silver/Gold) (The specific size is described by the picture)
Option three:
4 X Screw extractorswith box(Silver/Gold) (The specific size is described by the picture)

Note:

1. The remover is designed for screws that slide or break the head, and the stuck or rusty screws need to be operated together with the flashlight drill. And the speed should be slow, do not be too high or suddenly speed up.

The whole process needs to reverse the operation, first take one head open, then take the other end out, the success rate of the removal is very high.

2. Hardness at 58 degrees -60 degrees, wood screw is no problem (not suitable for steel plate operation)

3. The remover is suitable for orthodontature screws, anti- screws are not applicable

Q: What are the skills for novices?

A: The bit speed can’t be too fast, so low speed!Broken wire extractor is double-ended.

Step (1): Drill bit that head first drilling, speed needs to be based on different material settings.

The harder the material, the slower the speed of the drill

Step (2): When the extractor is taken out, the drill should be reversed, and the rotation speed should not be too fast. Otherwise, it is easy to slip the teeth. The extractor should be able to slowly remove the screws.